Compuprint MDP40B Programmer Manual Instrukcja Użytkownika Pobierz pdf (Strona 33)

A-31

ESC N

Sets the skipover perforation to n lines.

(IBM Proprinter XL24/XL24E, 2391+, EPSON ESC/P2)

ASCII Code ESC N

Hexadecimal Value 1B 4E

Decimal Value 27 78

Range 1 <

< 127 (EPSON mode)

1 <

< 225 (IBM mode)

The skipover perforation is the sum of top and bottom margins values at the selected

vertical spacing. The n parameter must be less than the current form length. The

skipover is memorized as physical position on the page. It is cancelled by ESC O or

changing the form length. The skipover value, when accepted, will set the top and

bottom margins according to the operator panel setting (see the User Manual):

If the top margin set via operator panel is greater than the skipover value, then the

following value of the margins will be set:

Top margin = skipover value

Bottom margin = 0

If the top margin set via operator panel is less or equal to the skipover value, then

the following value of the margins will be set:

Top margin = operator panel value

Bottom margin = the difference between skipover value and top margin value

If the sum of the top and bottom margins values set via operator panel is less than

the skipover value, the following values for the margins will be set:

Top margin = operator panel value

Bottom margin = the difference between skipover value and top margin value

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 288 289

Brak uwag

Compuprint MDP40B Programmer Manual Instrukcja Użytkownika Strona 33