Compuprint MDP40B Programmer Manual Instrukcja Użytkownika Pobierz pdf (Strona 174)

C-32

The bits of parameter "p" identify the print modes selected:

b8: = 0 fixed

b7: = 1 fixed

b6: = 0 fixed

b5: = 0 fixed

b4: = 0 fixed

b3: = 0 Positive print

= 1 Negative print

b2: = 0 Does not follow m parameter

= 1 Follows m parameter

b1: = 0 Does not follow n parameter

= 1 Follows n parameter

Positive print associates to level 1 of the bit received the print of a dot and to the level

0 the non print; negative print does the opposite.

The decimal value of the m parameter defines the length of the print line, expressed in

number of points.

If the parameter has value 0 or is absent, the default condition is forced; its value

corresponds to the maximum number of points printable per line at the selected

density, minus any value of the left margin.

The decimal number of the n parameter defines, in elementary steps, the horizontal

position at which two consecutive dots can be printed.

If the parameter has value 0 or is absent, the default condition is forced (180 dpi).

1 2 ... 169 170 171 172 173 174 175 176 177 178 179 ... 288 289

Brak uwag

Compuprint MDP40B Programmer Manual Instrukcja Użytkownika Strona 174