1USER GUIDE of NETWORK INTERFACE Welcome to use Network Interface to perform network printing. Please perform the following steps. STEP 1: the Pr
10 3.Select the item “Printer Manager” and press “enter”. 4.Enter the Printer Manager interface to install a remote printer.
11 5.Select the “Host Name”.
12 6.Type the printer name such as “name_001”. Select “OK” to quit.
13 7.Config the Remote Print Services. 8.Quit and set it as the default printer:
14# /usr/lib/lpadmin –d name_001 Method 2: Use command-lines to add remote printer 1.Enter the following command in shell: # rlpconf 2.Enter the
15 3.Install the remote printer. 4.Enter the name of remote host that name_001 is attached to, such
16as name_001. 5.Install the remote printer.
17 6.Set it as the default printer. 7.Quit.
18 STEP 5 : Printing and Monitoring 1.Printing 1)If you use WINDOWS, perform printing as usual, making sure that the printer’s default port has been
19 2)If you use UNIX, perform printing through the remote printer added in STEP 4. For example, if the printer’s name is name_001, you can enter the
21. Enter the DOS command line window 2. Type the following commands: arp -s <IP address> <MAC address> ping <IP address> arp -d
3arp -s name_001 00-0b-00-18-40-63 temp ping name_001 NOTE 1: The response messages will be shown, such as “name_001 is alive”, and so on. This mean
4Name – The NETBIOS name in WINDOWS network, such as PS_I. The name is valid only if the WINS(Windows Internet Name Service) is supported and enabled
5 2.Click the “Port” tab, and then click the “Add Port…”button in the window of the properties. 3.Click the “Standard TCP/IP Port” item, and then c
6DHCP.You can also change the default “Port Name” if necessary. And then click the “Next” button. 5.Select the “Custom” and click the “Settings” bu
7 7. Complete the subsequent step .
9 z If you use WINDOWS 98, please run the software “Network Port Setup for Win98” to add a network printing port for the printer. z UNIX System M
Komentarze do niniejszej Instrukcji