Compuprint SP40 Instrukcja Użytkownika Pobierz pdf (Strona 34)

Setup Parameter Values Description

automatic type is selected between serial and parallel by the printer

depending on data coming from host.

*It is reported if the LAN option is installed. For details refer to the

LAN manual

IBM FINANCIAL no,

honorCTS,

ignoreCTS

Disables the Financial protocol if IBM 4722 or IBM 9068

emulation is selected

Enables the IBM FINANCIAL for the IBM 4722 and 9068

protocols. Considers (handles) or ignores the CTS signal

received from host for the control of the data stream from host.

INPUT BUFFER 1 Kb, 8 Kb, 16 Kb, 32 Kb,

64 Kb

Selects the buffer size.

When the 'financial' interface is selected, this setting is ignored.

IGNORE PE enabled, disabled Selects whether the printer signals the paper empty condition

(disabled) or not (enabled) on the busy line.

AUTOFEED SIGNAL disabled, enabled The parallel interface uses (enabled) or does not use

(disabled) the AUTOFEED signal.

SLCT-IN SIGNAL disabled, enabled The parallel interface uses (enabled) or does not use

(disabled) the SELECT-IN signal.

BUFFER CONTROL DTR+SRTS, SRTS,

XON/XOFF, ETX/ACK,

XON/XOFF+DTR+SRTS

Selection of the buffer protocol. When the 'financial' interface is

selected, this setting is ignored.

ROBUST XON enabled, disabled Perform the Robust XON (enabled) or not (disabled).

WORD LENGTH 7 bit, 8 bit Sets the number of the data bits. When the 'financial' interface is

selected, this value is always set to 8 bits.

BAUD RATE 1200 – 38400 bps Sets the data transfer rate.

PARITY BIT even, odd, space, mark, Selects the parity control for the data.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 71 72

Brak uwag

Compuprint SP40 Instrukcja Użytkownika Strona 34